PEDESTRIAN COATINGS

A monolithic system, designed to positively waterproof concrete surfaces by excluding moisture penetration during low temperature freeze-thaw cycling or high temperature, high humidity thermal cycling.

A monolithic system, designed to positively waterproof pedestrian surfaces by excluding moisture penetration during low temperature freeze-thaw cycling or high temperature, high humidity thermal cycling.

Utilizing the ELASTA-TUFF 5000/6000 PED System

This system utilizes single component, moisture cured elastomeric urethane waterproofing system designed for pedestrian traffic. It is a monolithic system, designed to waterproof concrete and plywood surfaces by excluding moisture penetration during low temperature exposure as well as high temperature, high humidity thermal cycling. This waterproofing system has excellent adhesion, impact and abrasion resistance, while exhibiting superior flexibility and weather resistance.

Utilizing the ELASTA-TUFF 5000/6000 X-2 System

An elastomeric urethane waterproofing system designed for pedestrian and roof surfaces which require high performance waterproofing. It is a monolithic system, designed to positively waterproof concrete and plywood surfaces by excluding moisture penetration during low temperature freeze-thaw cycling or high temperature, high humidity thermal cycling.

Utilizing the UREA-TUFF 4200-PT Technology

This system is designed for pedestrian deck resurfacing. UREA-TUFF 4200-PT is a two component, fast setting, rapid curing and solvent free aliphatic polyurea elastomeric coating which can be applied to properly prepared interior or exterior concrete, plywood and metal surfaces. It is suitable for application in temperatures as low as 32°F and is rather insensitive to moisture.

Utilizing the TUFFLEX - II Walking Deck System

A multi layered one-hour fire resistance-rated coating system for exterior walking roof deck surfaces. The system is applied over plywood substrates which have a minimum ¼ inch per foot slope for water drainage. Components of the system consist of galvanized expanded metal lath secured to the deck. A polymer reinforced underlayment mix known as TUFFCRETE is troweled over the metal lath. A layer of fiberglass matting is then bonded to the surface using TUFFLEX II Basecoat Resin. A texture coat of TUFFLEX II Texture Coat mixture is then applied followed by a pigmented sealer coat of TUFFLEX II Top Coat.

Utilizing TUFFLEX #55-INT System

This system is a low odor, abrasion resistant, urethane plus epoxy waterproof coating system suitable for interior mechanical equipment room decks. It is a monolithic system, designed with integral flashing reinforcement around and over equipment pads to effectively seal the areas underneath from moisture penetration. This system incorporates excellent adhesion, flexibility and abrasion resistance while demonstrating superior chemical stability. Physical stresses imposed by vibration of equipment will not cause delaminating or rupture of the waterproof coating system.